An Evaluation Of The Environmentally Friendly Refrigerants

The focus on the detrimental effects of chlorofluorocarbons has been around for quite some time. It was first determined years ago that substances such as Freon, one of the most common coolants in the world, was actually causing a worldwide problem. The ozone layer is constantly monitored, and decades ago, it was first notice that it was beginning to dissipate. After many researchers concluded that chlorofluorocarbons could have been the problem, they began to limit their production. As the ozone layer came back, they realize that this proposition was correct. It really was CFCs. Therefore, they took it upon themselves to create environmentally friendly refrigerants that could be used instead of R-22. Today, there are many choices when it comes to alternative CFCs. Hydrochlorofluorocarbons are very popular. There are some that have gained in popularity, not only because of their marketing, but because of how efficient it can make new and existing equipment helping to save businesses money. Here is an evaluation of the environmentally friendly refrigerants that are currently available today.

Do Many Refrigeration Units Have Freon?

The short answer to this question is yes. For decades, this was the primary refrigerant that was used. It was easy to make, and based upon how efficient it was at producing cold air within a refrigeration unit, it was what everyone used. It was a wake-up call for those that were producing refrigerants when the studies came out about CFCs and how they affected the ozone layer. Without this layer of the atmosphere, potentially dangerous types of radiation can come in, causing skin problems and more. Over decades, millions of refrigeration units have been made. There are likely millions more sitting in landfills. If all of them begin to leak, it could cause a substantial problem. That’s why all of the newer ones today are made with these alternative refrigerants which have proven to be safe. Most importantly for businesses, especially those that are trying to make as much money as possible, many of them are much more energy efficient. Here are just a few of the environmentally friendly refrigerants that you may want to consider using.

Environmentally Friendly Refrigerants That You Should Use

There are several that you should consider using. One of the top choices is called R410. Even if it does escape the refrigeration system, it’s not going to do anything to the ozone layer. It was one of the many that was specifically manufactured in order to replace Freon. It is because of their testing that they determine that this was completely safe, made primarily from chlorine and bromide. There is another company that has been manufacturing a replacement coolant which is called TDX 20. If you have seen it before, you have probably seen the marketing name of Bluon- http://bluonenergy.com. This is considered by many people to be the most energy efficient coolant ever manufactured. However, the reason that it is popular is because it can lower the total cost of running your refrigeration units, producing more cold air at a lower cost.

How To Get Started With Replacing Your Existing Coolants

There are a couple of things that you can do to start replacing your coolants. First of all, you can try to do this on your own. This is not recommended. It takes very special tools, as well as a unit to capture the Freon, preventing it from changing from a liquid to a gas and thus escaping into the atmosphere. When you work with HVAC professionals, they will have all of this equipment. All of the workers will also be trained to do these procedures. Once they are done, you will know that everything will have been accomplished as planned. Most importantly for your business, you are going to start saving money. There are many other reasons that you should consider replacing R-22 other than the fact that it is mandated. For your business, you always want to work with the most efficient machines, and these new coolants will certainly help you if you are using refrigeration units regularly.

Best Reasons For Businesses To Replace R-22

There are several reasons why you need to replace the Freon that you have in your existing units. First of all, it’s not going to be legal in a very short amount of time. It is required by law to not use Freon, and therefore it needs to be replaced with another coolant that is environmentally safe. From a financial perspective, it is a great decision to make. The lower temperatures and pressures that can be achieved by using these new coolants will make this an investment into your business that will pay for itself many times over. The vibration in your machine will go down, and you will have more stability, plus many of these are EPA approved. If you do decide to use one of the replacement coolants that has been mentioned, you will earn the initial cost of this investment back in a few short years. The amount of energy that you are going to use to run your equipment will be greatly diminished. This is more money in your pocket and it will be this way from that point forward.

These are just a couple of the environmentally friendly refrigerants that are currently available on the market today. Although these are helpful, you will need professional HVAC individuals to do the replacement for you. If you are getting something new, you can actually request that you get one particular type of coolant over another. Even if there is an extra charge, you are going to benefit so much from using these new and improved coolants that the initial cost won’t even matter. As we move forward in time, it is so important to only use products that will not harm the environment. You will be doing your small part by replacing R-22. Best of all, at least for your business, you are going to become more profitable than ever before because of how energy-efficient these products are.

Related Posts